|
Course Title |
Information |
Cost |
| Combustion Furnace Safety |
The goal of this course is to teach the trainee to be able to identify hazards in
the workplace in and around a combustion reheat furnace and with that knowledge,
avoid injury. |
Free for Bricmont Customers |
| Electrical Safety (Long Course) |
The goal of this course is to teach the trainee to be able to discuss the electrical safety, Subpart S, Electrical, of 29 CFR 1910.
Electrical safety training, required by this subpart, is a subset of this electrical safety course, specifically modules 1, 2, and 5.
|
|
| Electrical Safety (Short Course) |
The goal of this course is to teach the trainee to be able to discuss the electrical safety, Subpart S, Electrical, of 29 CFR 1910.
Electrical safety training, required by this subpart, is a subset of this electrical safety course, specifically modules 1, 2, and 5.
The lockout/tagout (LOTO) module (module 3) has been omitted from this course.
|
|
| Confined Space |
The goal of this course is to teach the trainee to be able to discuss the
requirements of entry into a permit-required confined space as defined in 29 CFR
1910.146. |
|
| Lockout/Tagout |
|
|
| HAZCOMM |
The goal of this course is to teach the trainee to be able to discuss hazard
communication and the right to know. |
|
| Pusher/Walking Beam Operations |
The goal of this course is to teach the trainee to be able to operate the furnace with:
Increased Productivity,
Increased Fuel Efficiency,
Increased Quality of Product Heating, and
Decreased Maintenance Costs.
|
|
| Tunnel Furnace Operation |
Tunnel Furnace Operations The goal of this course is to teach the trainee to be
able to operate the furnace with: Increased Productivity, Increased Fuel
Efficiency, Increased Quality of Product Heating, and Decreased Maintenance
Costs. |
|
| Tunnel Furnace Mechanical Maintenance |
The goal of this course is to teach the trainee to be able to maintain the furnace
through an understanding of the use and function of the primary components of
the furnace. |
|
| Hydraulics |
The goal of this course is to teach the trainee to be able to discuss the principles and use of hydraulics and the variety of components in a hydraulic system. |
|
| Statisical Process Control (SPC) |
The goal of this course is to teach the trainee to be able to discuss and utilize
SPC in evaluating performance |
|
Below is a listing of stock courses
available on (OP)2 and Torbix.